Rent Lectrosonics new LR receiver, compatible with other lectrosonics on Block A1, 470, 19, and 20
Note: Compatible with Lectrosonics on Block A1, 470, 19, 20
Channel: A1
Operating Frequencies: 470.100 to 537.575 MHz
Frequency Selection Steps: Selectable 25 or 100 kHz
Receiver Type: Dual conversion, superheterodyne
IF Frequency: 243.950 MHz and 250.000 kHz
Frequency Stability: ± 0.001%
Front End Bandwidth: 20 MHz @ -3 dB
Sensitivity: 20 dB SINAD: 1.0 uV (-107 dBm), A weighted
60 dB Quieting: 2.2 uV (-100 dBm), A weighted
Squelch Quieting: > 100 dB typical
Modulation Acceptance: +/-100 kHz max. varies with selected compatibility mode
Image and Spurious Rejection: 85 dB
Third Order Intercept: 0 dBm
Diversity Method: SmartDiversity phased antenna combining
FM Detector: Digital pulse counting detector
RF Spectrum Analyzer: Single and multiple block scanning modes with coarse and fine views of results
Antenna Inputs: 2x 50 ohms SMA female connectors
Audio Output: 1x TA3 male (mini XLR) balanced output
Audio Output Level: Adjustable -50 to +5 dBu in 1 dB steps, unbalanced output level is 6 dB lower
Front Panel Controls: Sealed panel with membrane switches
LCD for setup menus and monitoring
Audio Test Tone: 1 kHz, -50 dBu to +5 dBu output (balanced), 1% THD
Transmitter Battery Type Selection: AA alkaline or lithium
Timer available for use with alkaline, lithium and HiMH
Audio Polarity Selection: Normal or inverted
Compatibility Modes: Digital Hybrid (North American and European)
Lectrosonics 100, 200 and 300 series
Lectrosonics IFB
Non-Lectrosonics modes 3, 6 an 7 (contact the factory for details)
SmartNR (Noise Reduction): Off, Normal, Full modes (available in Digital Hybrid mode only)
Frequency Response: 32 Hz to 20 kHz (+/- 1 dB) receiver only (see transmitter documentation for overall system response)
Total Harmonic Distortion (THD):
Top Panel Features: 1 x TA3M audio output jack
2 x SMA antenna jacks 1 x IR (infrared) port
Battery / Runtime: 4 hours, AA alkaline
Operating Temperature: -4 to 32 °F (-20 to +50°C)
Dimensions (L x W x H): 3.21 x 2.45 x 0.84" (82 x 62 x 21 mm)
Weight: 6.54 oz (185.4 g) with two AA lithium batteries
Package Weight: 1.1 lb
Box Dimensions (LxWxH): 9.7 x 8.1 x 2.9"
- 2 x AA Batteries
- XLR to Ta3F
- 1/8" to Ta3F
- Belt Clip