The Sound Devices 302 is a 3 channel audio mixer rental designed to meet the demands of professional film, ENG / EFP and broadcast applications.
The 302 features 3 balanced XLR inputs that are capable of accepting mic or line-level signal (user switchable).
The output stage features stereo (L/R) balanced XLR outputs that are also mic or line level switchable (factory set to line, refer to manual for mic level set up).
Each channel provides individually switchable +48V, +12V and +12V-T phantom power for condenser microphones.
Low-cut filter switches eliminate noise below 80Hz and the unit is powered by 3 AA batteries (included) or external 5 - 18VDC power source.
Inputs: 3 - 3-pin LR female: microphone / line level level
Output: 2 - 3-pin LR male: microphone / line level refer to manual for set up
Monitor/Headphone Out: PHONES: 1/8" (3.5mm) mini stereo output jack
ALT I/O: RN: 1/8" (3.5mm) mini stereo output jack - monitor input / alternate ch. 4&5 inputs refer to manual for set up
TAPE OUT/MIX OUT: TA3-type unbalanced
Link Input/Output: Above TAPE OUT / MIX OUT is also used to link to the Mix In of a 442 or 302
2.5k ohms (actual), XLR, mic setting, 16k ohms (actual), XLR, line setting, Outputs: 150 ohms (actual), XLR factory Line setting, > = 600 ohm mics
150 ohms (actual), mic (lowest) setting,
Gain: XLR Inputs:
75dB, mic / 35dB, line - XLR output @ factory (line) setting 0-16dB 2dB steps, mic / 40-56dB 2dB steps, line - XLR output attenuated
Hum & Noise: EIN: -126dBu (-128 BV) max (22Hz - 22kHz bandwidth , flat filter, trim control fully up)
Frequency Response: 20Hz - 30kHz, +0.2, -0.5dB, -1dB @ 5Hz and 50kHz typical
Distortion: THD + Noise: 0.007% typical (1kHz, +4dBu at Line Out) 0.009 max (50Hz to 20kHz, +18dBu at Line out, fader fully up)
Metering: Stereo (L/R) 20 segment, sunlight viewable LED meters
Control Voltage Out: No
Phantom Power: 12V, 12V-T & 48V
Operating Temperature: Operating: -20 degrees to 60 degrees Celsius, 0 to 95% relative humidity (non-condensing)
Storage: -40 degrees to 85 degrees Celsius
Power: 130mA @ 4.5V, internal batteries, idle, no phantom
55mA @ 12V external DC, idle, no phantom
Dimensions: 1.8 x 8.4 x 4.5" (47 x 214 x 114mm) (HxWxD)
Weight: 1.8 lbs (0.85kg) unpackaged with three alkaline AA batteries
Package Weight: 3.0 lb
Box Dimensions (LxWxH): 10.8 x 7.4 x 4.9"